|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BT151X series Thyristors Rev. 04 -- 9 June 2004 Product data sheet 1. Product profile 1.1 General description Passivated thyristors in a SOT186A full pack plastic package. 1.2 Features s High thermal cycling performance s High bidirectional blocking voltage capability s Isolated mounting base. 1.3 Applications s Motor control s Industrial and domestic lighting, heating and static switching. 1.4 Quick reference data s VDRM, VRRM 800 V (BT151X-800) s VDRM, VRRM 650 V (BT151X-650) s VDRM, VRRM 500 V (BT151X-500) s IT(RMS) 12 A s IT(AV) 7.5 A s ITSM 120 A. 2. Pinning information Table 1: Pin 1 2 3 mb Discrete pinning Description cathode (k) anode (a) gate (g) mounting base; isolated mb sym037 Simplified outline Symbol 123 SOT186A (TO-220) Philips Semiconductors BT151X series Thyristors 3. Ordering information Table 2: Ordering information Package Name BT151X-500 BT151X-650 BT151X-800 Description Version plastic single-ended package; isolated heatsink mounted; 1 mounting hole; SOT186A 3 lead TO-220 `full pack' Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDRM, VRRM Parameter repetitive peak off-state voltage BT151X-500 BT151X-650 BT151X-800 IT(AV) IT(RMS) ITSM average on-state current RMS on-state current half sinewave; Ths 69 C; Figure 1 all conduction angles; Figure 4 and Figure 5 [1] [1] Conditions Min - Max 500 650 800 7.5 12 Unit V V V A A non-repetitive peak on-state current half sinewave; Tj = 25 C prior to surge; Figure 2 and Figure 3 t = 10 ms t = 8.3 ms over any 20 ms period -40 120 132 72 50 2 5 5 0.5 +150 125 A A A2s A/s A V W W C C I2t dIT/dt IGM VRGM PGM PG(AV) Tstg Tj [1] I2t for fusing repetitive rate of rise of on-state current after triggering peak gate current peak reverse gate voltage peak gate power average gate power storage temperature junction temperature t = 10 ms ITM = 20 A; IG = 50 mA; dIG/dt 50 mA/s Although not recommended, off-state voltages up to 800 V may be applied without damage, but the thyristor may switch to the on-state. The rate of rise of current should not exceed 15 A/s. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 2 of 11 Philips Semiconductors BT151X series Thyristors 15 Ptot (W) 2.2 10 2.8 4 conduction angle (degrees) 30 60 90 120 180 0 0 2 4 6 IT(AV) (A) form factor a 4 2.8 2.2 1.9 1.57 001aaa961 57.5 Ths(max) (C) 80 a= 1.57 1.9 5 102.5 125 8 a = form factor = IT(RMS)/IT(AV). Fig 1. Total power dissipation as a function of average on-state current; maximum values. 160 ITSM (A) 001aaa957 IT ITSM 120 t tp Tj initial = 25 C max 80 40 0 1 10 102 n 103 f = 50 Hz. Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 3 of 11 Philips Semiconductors BT151X series Thyristors 103 001aaa956 ITSM (A) dlT/dt limit 102 IT ITSM t tp Tj initial = 25 C max 10 10-5 10-4 10-3 tp (s) 10-2 tp 10 ms. Fig 3. Non-repetitive peak on-state current as a function of pulse width; maximum values. 001aaa955 25 IT(RMS) (A) 20 16 IT(RMS) (A) 12 001aaa960 15 8 10 4 5 0 10-2 10-1 1 10 surge duration (s) 0 -50 0 50 100 Ths (C) 150 f = 50 Hz; Ths 87 C. Fig 4. RMS on-state current as a function of surge duration; maximum values. Fig 5. RMS on-state current as a function of heatsink temperature; maximum values. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 4 of 11 Philips Semiconductors BT151X series Thyristors 5. Thermal characteristics Table 4: Symbol Rth(j-hs) Thermal characteristics Parameter thermal resistance from junction to heatsink Conditions Figure 6 with heatsink compound without heatsink compound Rth(j-a) thermal resistance from junction to ambient in free air 55 4.5 6.5 K/W K/W K/W Typ Max Unit 10 Zth(j-hs) (K/W) 1 (1) (2) 001aaa964 10-1 P = tp T 10-2 tp T t 10-3 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 (1) Without heatsink compound. (2) With heatsink compound. Fig 6. Transient thermal impedance as a function of pulse width. 6. Isolation characteristics Table 5: Isolation limiting values and characteristics Ths = 25 C unless otherwise specified Symbol Visol Parameter Conditions Typ Max 2500 Unit V RMS isolation voltage from all f = 50 to 60 Hz; sinusoidal three terminals to external waveform; R.H. 65%; clean and heatsink dust free capacitance from pin 2 to external heatsink f = 1 MHz Cisol 10 - pF 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 5 of 11 Philips Semiconductors BT151X series Thyristors 7. Characteristics Table 6: Characteristics Tj = 25 C unless otherwise stated Symbol IGT IL IH VT VGT Parameter gate trigger current latching current holding current on-state voltage gate trigger voltage Conditions VD = 12 V; IT = 0.1 A; Figure 8 VD = 12 V; IGT = 0.1 A; Figure 10 VD = 12 V; IGT = 0.1 A; Figure 11 IT = 23 A; Figure 9 VD = 12 V; IT = 0.1 A; Figure 7 VD = VDRM(max); IT = 0.1 A; Tj = 125 C ID, IR off-state leakage current critical rate of rise of off-state voltage VD = VDRM(max); VR = VRRM(max); Tj = 125 C VDM = 67% VDRM(max); Tj = 125 C; exponential waveform; Figure 12 gate open circuit RGK = 100 tgt tq gate controlled turn-on time circuit commuted turn-on time ITM = 40 A; VD = VDRM(max); IG = 0.1 A; dIG/dt = 5 A/s VD = 67% VDRM(max); Tj = 125 C; ITM = 20 A; VR = 25 V; dITM/dt = 30 A/s; dVD/dt = 50 V/s; RGK = 100 50 200 130 1000 2 70 V/s V/s s s Min 0.25 Typ 2 10 7 1.4 0.6 0.4 0.1 Max 15 40 20 1.75 1.5 0.5 Unit mA mA mA V V V mA Static characteristics Dynamic characteristics dVD/dt 1.6 001aaa953 3 IGT (Tj) IGT (25 C) 2 001aaa952 VGT (Tj) VGT (25 C) 1.2 0.8 1 0.4 -50 0 50 100 Tj (C) 150 0 -50 0 50 100 Tj (C) 150 Fig 7. Normalized gate trigger voltage as a function of junction temperature. Fig 8. Normalized gate trigger current as a function of junction temperature. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 6 of 11 Philips Semiconductors BT151X series Thyristors 30 IT (A) 20 001aaa959 3 IL (Tj) IL (25 C) 2 001aaa951 (1) (2) (3) 10 1 0 0 0.5 1 1.5 VT (V) 2 0 -50 0 50 100 Tj (C) 150 VO = 1.06 V. RS = 0.0304 . (1) Tj = 125 C; typical values. (2) Tj = 125 C; maximum values. (3) Tj = 25 C; maximum values. Fig 9. On-state current characteristics. Fig 10. Normalized latching current as a function of junction temperature. 104 dVD/dt (V/s) 103 (1) 3 IH (Tj) IH (25 C) 2 001aaa950 001aaa949 (2) 1 102 0 -50 10 0 50 100 Tj (C) 150 0 50 100 Tj (C) 150 (1) RGK = 100 . (2) Gate open circuit. Fig 11. Normalized holding current as a function of junction temperature. Fig 12. Critical rate of rise of off-state voltage as a function of junction temperature; minimum values. 8. Package information Epoxy meets requirements of UL94 V-0 at 18 inch. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 7 of 11 Philips Semiconductors BT151X series Thyristors 9. Package outline Plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 3 lead TO-220 'full pack' SOT186A E P q D1 T mounting base A A1 D j L2 b1 L b2 L1 K Q 1 2 b e e1 3 wM c 0 5 scale 10 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 4.6 4.0 A1 2.9 2.5 b 0.9 0.7 b1 1.1 0.9 b2 1.4 1.0 c 0.7 0.4 D 15.8 15.2 D1 6.5 6.3 E 10.3 9.7 e 2.54 e1 5.08 j 2.7 1.7 K 0.6 0.4 L L1 L2 max. 3 (1) P 3.2 3.0 Q 2.6 2.3 q 3.0 2.6 T (2) w 0.4 14.4 3.30 13.5 2.79 2.5 Notes 1. Terminal dimensions within this zone are uncontrolled. Terminals in this zone are not tinned. 2. Both recesses are 2.5 x 0.8 max. depth OUTLINE VERSION SOT186A REFERENCES IEC JEDEC 3-lead TO-220F JEITA EUROPEAN PROJECTION ISSUE DATE 02-03-12 02-04-09 Fig 13. Package outline. 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 8 of 11 Philips Semiconductors BT151X series Thyristors 10. Revision history Table 7: Revision history Release date 20040609 Data sheet status Product specification Change notice Order number 9397 750 13162 Supersedes BT151X_SERIES_3 Document ID BT151X_SERIES_4 Modifications: BT151X_SERIES_3 BT151X_SERIES_2 BT151X_SERIES_1 * The format of this specification has be redesigned to comply with Philips Semiconductors' new presentation and information standard Product specification Product specification Product specification BT151X_SERIES_2 BT151X_SERIES_1 - 20030901 19990601 19970901 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 9 of 11 Philips Semiconductors BT151X series Thyristors 11. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 12. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 13. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 13162 (c) Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 04 -- 9 June 2004 10 of 11 Philips Semiconductors BT151X series Thyristors 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Isolation characteristics . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package information . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Contact information . . . . . . . . . . . . . . . . . . . . 10 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 9 June 2004 Document order number: 9397 750 13162 Published in The Netherlands |
Price & Availability of BT151X-800R |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |